Skip to Content
Download Soil Risk Registry (PDF)
Forensic Soil Report

The Hidden Threat of Mountview silt loam, 2 to 5 percent slopes, eroded for Homeowners in Five Points

Forensic LeadElias Thorne, P.E.
PublishedAugust 16, 2026
VerifiedGeological Registry v2026.1

Geological Profile: Five Points, TN

Soil TypeMountview
Plasticity (PI)14.0
Expansion Potential0.9% LEP
Risk ClassMODERATE

What is Mountview silt loam, 2 to 5 percent slopes, eroded?

Mountview silt loam, 2 to 5 percent slopes, eroded is a moderate clay soil formation common in Five Points. It is characterized by a high silica content that causes it to absorb water and swell volume by up to 0.9%. Engineers value it for agriculture but fear it for construction due to its "shrink-swell" volatility.

Why Five Points Foundations Fail

If you live in Central Five Points, or surrounding areas, your home is interacting with this critical geology. Unlike stable sandy loams, Mountview clay moves. Because of this severe movement, homeowners experiencing active structural settlement should immediately consult our Five Points Foundation Repair engineering team.

The defining metric is the Plasticity Index (PI) of 14.0. This PI indicates relatively stable ground, though localized drainage issues can still undermine grade beams.

The "Active Zone" Depth

In Five Points, the "Active Zone"—where moisture levels fluctuate—extends 12-15 feet deep. Standard builder piers often stop at 8 feet. This mismatch is why we see repetitive failures in 00000.

"Homeowners in Five Points often pay for 'Standard Press Piles' that sit inside the active zone. When the Mountview silt loam, 2 to 5 percent slopes, eroded moves, the pier moves with it."
- Elias Thorne, Lead Forensic Engineer

3 Signs of Mountview Soil Failure

  • Diagonal Shear Cracks: Extending from door/window corners (45-degree angles).
  • Friable Soil Gap: Soil pulling 1-2 inches away from the foundation perimeter in summer.
  • Sticking Doors: Specifically on the exterior walls relative to the center of the home.

Engineering Protocol: Correct vs. Incorrect

MethodSuitability for Mountview silt loam, 2 to 5 percent slopes, erodedVerdict
Pressed Concrete PilingOften shallow (8-10ft); relies on friction in active clay.Avoid ❌
Steel Piers (E3000)Driven to absolute refusal (rock/shale) below active zone.Recommended ✅
Bell-Bottom PiersDrilled concrete; excellent stability but higher cost/mess.Viable Option

Apply these Findings to your Home

Request a Free Foundation Inspection for your specific street address.

Licensed TX P.E. Oversight (PE-88XXXX)

Neighborhood Watch

We are monitoring elevated PI readings in these areas:

Central Five Points

Unsure about your cracks?

Don't guess. Compare your symptoms against our forensic database or take the diagnostic quiz.