Skip to Content
Download Soil Risk Registry (PDF)
Forensic Soil Report

The Hidden Threat of Kemah silt loam, 0 to 1 percent slopes, rarely flooded for Homeowners in Friendswood

Forensic LeadElias Thorne, P.E.
PublishedAugust 8, 2026
VerifiedGeological Registry v2026.1

Geological Profile: Friendswood, TX

Soil TypeKemah
Plasticity (PI)14.0
Expansion Potential2.6% LEP
Risk ClassMODERATE

What is Kemah silt loam, 0 to 1 percent slopes, rarely flooded?

Kemah silt loam, 0 to 1 percent slopes, rarely flooded is a moderate clay soil formation common in Friendswood. It is characterized by a high silica content that causes it to absorb water and swell volume by up to 2.6%. Engineers value it for agriculture but fear it for construction due to its "shrink-swell" volatility.

Why Friendswood Foundations Fail

If you live in Central Friendswood, or surrounding areas, your home is interacting with this critical geology. Unlike stable sandy loams, Kemah clay moves. Because of this severe movement, homeowners experiencing active structural settlement should immediately consult our Friendswood Foundation Repair engineering team.

The defining metric is the Plasticity Index (PI) of 14.0. This PI indicates relatively stable ground, though localized drainage issues can still undermine grade beams.

The "Active Zone" Depth

In Friendswood, the "Active Zone"—where moisture levels fluctuate—extends 12-15 feet deep. Standard builder piers often stop at 8 feet. This mismatch is why we see repetitive failures in 77546.

"Homeowners in Friendswood often pay for 'Standard Press Piles' that sit inside the active zone. When the Kemah silt loam, 0 to 1 percent slopes, rarely flooded moves, the pier moves with it."
- Elias Thorne, Lead Forensic Engineer

3 Signs of Kemah Soil Failure

  • Diagonal Shear Cracks: Extending from door/window corners (45-degree angles).
  • Friable Soil Gap: Soil pulling 1-2 inches away from the foundation perimeter in summer.
  • Sticking Doors: Specifically on the exterior walls relative to the center of the home.

Engineering Protocol: Correct vs. Incorrect

MethodSuitability for Kemah silt loam, 0 to 1 percent slopes, rarely floodedVerdict
Pressed Concrete PilingOften shallow (8-10ft); relies on friction in active clay.Avoid ❌
Steel Piers (E3000)Driven to absolute refusal (rock/shale) below active zone.Recommended ✅
Bell-Bottom PiersDrilled concrete; excellent stability but higher cost/mess.Viable Option

Apply these Findings to your Home

Request a Free Foundation Inspection for your specific street address.

Licensed TX P.E. Oversight (PE-88XXXX)

Neighborhood Watch

We are monitoring elevated PI readings in these areas:

Central Friendswood

Unsure about your cracks?

Don't guess. Compare your symptoms against our forensic database or take the diagnostic quiz.